AquaThane / DuraGard Quarts

AquaThane™ / DuraGard™ is a furniture finish quality, co-polymer acrylic urethane that can be used as a topcoat on any plain or decorative surface where maximum durability is required. It is a super hard topcoat with the flow-out of solvent-based material, in a water-based formula

Basic Application:

• Clean the work surface, removing any dust or debris.
• Using a brush, roller or spray unit, apply 2 even coats of AquaThane™ / DuraGard™. The best results are obtained by spraying the product.
• Because AquaThane™ / DuraGard™ has strong co-solvent properties, it is best to apply a coat of ColorSeal™ or AquaGard™ first. Allow this barrier coat to dry before proceeding with AquaThane™ / DuraGard™. This will prevent the disruption of any sensitive color glazing or artwork.
• Permit AquaThane™ / DuraGard™ to dry for approximately 4-6 hours between coats.
• Allow AquaThane™ / DuraGard™ to cure for 72 hours before polishing or rubbing smooth with steel wool or polishing compounds.

Tips:

• To spray, thin up to 20% with water.
• Because of its ability to resist staining or marring, AquaThane™ / DuraGard™ is excellent for kitchen cabinets, trim, tabletops and floors.
• Can be used as a final clear topcoat over concrete for maximum durability. The concrete should first be coated with AquaBond™ or AquaGard™ for superior bonding and penetration of the substrate.
• On floors and walkways use a minimum of 2 coats of AquaThane™ / DuraGard™ over AquaBond™ or AquaGard™.

Square Footage

• Quart: 75 - 100 Square Feet

* Square Footage Notes vary depending on application method and style