StucoLux™ (Fine Polishing) Gallon

GAL_StucoLux_Fine_Polishing.jpg

Price: $64.22

 

StucoLux™ is a decorative, easy polishing mineral-based plaster. A creamy, smooth material, it glides on easily across any substrate. StucoLux™ has very good interior and exterior durability and provides beautiful undulations of color depth in the final finish.

Basic Application:

  • Ensure that the substrate is clean and free from oil, grease or any foreign substance.
  • Apply a coat of SetCoat® or Texture SetCoat™. *Important Note: The base coat must be thoroughly dry before proceeding.
  • Using a stainless steel application trowel, apply a sheer, very thin coat of StucoLux™ to the surface using short upward strokes. This first coat should be applied as smoothly as possible; some graceful trowel lines are permitted in this first base layer. It is best to work wet into dry for this application. Natural imperfections will enhance the color patterns when StucoLux™ is burnished during the final stages. Each light coat of StucoLux™ will dry fully in approximately 30 to 60 minutes depending on conditions.
  • To achieve the best results, a minimum of 3 thin coats is recommended. This will create better film formation and ultimately a more refined look. Once the final coat has been applied and is 80% to 90% dry, the burnishing process may be started. Less pressure is needed when burnishing is started at this stage.
  • Holding a stainless steel burnishing trowel at a slight angle (20°-30°), run the edge of the trowel over the surface using light pressure. Cheesecloth, terrycloth or a plastic bag can also be used for the initial burnishing. Once this step is complete go back over the entire surface using increased pressure on the trowel. This will result in a high gloss shine.

Tips:

  • The minerals contained in these products are non-toxic, durable and washable.
  • If water is splashed on the surface of unsealed StucoLux™, it will darken the surface. The finish will lighten back to the original color once the water evaporates.
  • For added protection and water resistance apply a coat of Olde World Venetian Sealer™ and/or a coat of Olde World Venetian Wax™ if desired

Square Footage:

  • Quart: 50 - 75 Square Feet

* Square Footage Notes vary depending on application method and style

SKU#: 80691410324

Tell a Friend about this product!